When the water stops moving, the pump will not prime, the pad is leaking or the breaker keeps tripping, we find the cause, tell you what it costs, and fix it.
A pool is a simple machine. Water leaves through the skimmer and main drain, passes through the pump and filter, sometimes a heater and a salt cell, and comes back through the returns. When something in that loop fails, the symptoms show up in the water: weak returns, cloudy water that will not clear, a pool that loses more than evaporation explains, or a pump that runs but moves nothing.
Tucson is hard on that loop. Equipment pads sit in direct sun that bakes plastic housings, lids and O-rings until they crack. Hard water leaves scale inside heaters and salt cells. Dust storms load filters faster than anywhere wetter, which makes pumps work harder through the hottest months. Most of what we repair traces back to one of those.
We start every repair call the same way: watch the system run, listen to it, check pressures and flow, and look for leaks. Then we tell you what is wrong, what it costs to fix, and whether fixing it is the right call or money better spent on a replacement. You decide before anything gets taken apart.
Weak returns, a pump that loses prime, air bubbles in the pump basket or jets, clogged lines and stuck valves. Usually a suction side leak, a cracked lid, a worn O-ring or a blockage, and usually quick to fix once it is found.
Drips at unions, valves, filter bands and pump seals, and cracked fittings on sun baked PVC. A slow drip at the pad wastes water and can undermine the slab if it is left alone.
Tripped breakers, timers that do not switch, automation that has lost its schedule and pumps that will not start. We trace the fault and fix it, or tell you plainly when a part needs to be replaced.
We run the system, check filter pressure, flow and the pump basket, listen to the motor, and look over plumbing, valves, the heater and the salt cell for leaks, scale or damage.
You get the cause, the fix and the price before any work starts. If the honest answer is that a replacement makes more sense than a repair, we say so and explain why.
Seals, O-rings, lids, valves, unions, fittings, motors, capacitors and timers repaired or replaced, using parts suited to the equipment you have.
We run the system after the repair, check pressures and flow, look for leaks, and walk you through what we did and anything we want to keep an eye on.
Call or send a request with what you are seeing: no flow, a noise, a leak, a breaker, cloudy water that will not clear.
A technician runs the system, checks pressures, flow and plumbing, and finds the cause.
You get the fix, the price, and any honest alternative, such as replacing a pump that is not worth another repair.
Most common repairs are done on the first visit with parts on the truck. Larger parts are ordered and scheduled.
We run the system under load, check for leaks and confirm flow is back where it should be.
If the pool turned while the equipment was down, we balance the water and bring it back so you can swim again.
We diagnose before we sell. A lot of repair calls end with a simple fix, a cracked lid, a worn O-ring or a stuck valve, and we would rather fix that than talk you into new equipment you do not need.
We see the same failures every week. Sun cooked housings, scale filled heaters, filters packed with monsoon dust and pumps fighting them. Knowing the local failure patterns means we find the cause faster.
And we are a service company as well as a repair company. If you want the pool looked after afterward, the people who fixed it can keep it running, which is how the next problem gets caught early.
Tell us what you are seeing. We will come out, find the cause and give you a price before any work starts.
Of the equipment, the heater and the pump are usually the most expensive single parts to replace, followed by automation systems and salt cells. Beyond the equipment, resurfacing an old interior is a much larger job, and it is not work we do. That is a big reason to keep the water balanced and the equipment maintained: it protects the costly parts.
The pool structure itself can last for decades. The equipment does not. In Tucson, sun, heat and hard water shorten the life of pumps, heaters and salt cells compared with milder climates, and interior finishes wear faster when the water is kept out of balance. Good water chemistry and shade or ventilation around the pad help everything last longer.
Start with a bucket test. Fill a bucket with pool water, set it on the first step so the water levels inside and outside match, mark both, and leave the pump on its normal schedule for a day or two. If the pool drops noticeably more than the bucket, you are losing water beyond evaporation. Also check the pad for drips and wet ground, and watch whether the loss slows when the pump is off. Tell us what you find and we will take it from there.
Running costs come from three places: weekly service or your own time and chemicals, electricity for the pump, and repairs as equipment ages. A variable speed pump, a clean filter and balanced water keep all three down. We give you a written price for any repair before the work starts.
Weekly, for most Tucson pools. Regular visits are also the cheapest form of repair prevention, because a technician who sees the pad every week catches a weeping seal or a high pressure filter before it becomes a failed pump.
We repair pools and pool equipment across Tucson, Oro Valley, Marana, Catalina Foothills, Vail, Sahuarita, Green Valley, SaddleBrooke, Casas Adobes and Rita Ranch.
Every area we cover
Pumps that hum, leak, overheat or will not prime, repaired where it makes sense and replaced with a variable speed pump where it does not.
Heaters, heat pumps, salt cells, timers, automation, valves and plumbing at the pad, repaired or replaced and set up to run efficiently.
Cartridge and DE filters taken apart, cleaned, inspected and put back, so the pump is not fighting a clogged filter through the heat and dust.
The same technician on the same day every week: skimming, brushing, vacuuming, baskets emptied, water tested and balanced for Tucson hard water.
Tell us what is going on with your pool. We will call to set up a visit, find the cause and price the fix before any work starts.
We will call to set up a visit and a water test. If it cannot wait, call (520) 555-0163.
Nothing was sent. Please call (520) 555-0163 and we will set up a visit and a water test.